IMPORTANT NOTE:
1. Use hand tools only for assembly as power tools
may cause damage
2. Carefully remove any staples used for packaging.
3. Phillips Screwdriver also needed for assembly
(not provided)
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Insert three Cam Lock Studs (13) into each Support Rail (5). Insert two Cam Lock Studs (13) into bottom of Desk Top (1).
FULLY TIGHTEN ALL CAM LOCK STUDS (13).
STEP 2
Insert four Wooden Dowels (15) into Support Panel (3), attach both Support Rails (5) to Support Panel (3) and secure using six Cam Locks (14),
FULLY TIGHTEN ALL CAM LOCKS (14).
Insert one Wooden Dowels (15) into each end of Trim Bars (9), attach two Angle Brackets (10) to both
Cross Panels (4) using one Short Screw (11) for each Angle Bracket (16). Secure one Trim Bar (9) to each Coross Panel (4) using two Short Screws (11) for
each Trim Bar (9).
FULLY TIGHTEN ALL SHORT SCREWS (11).
STEP 3
Insert six Cam Lock Studs (13) into both Side Panels (2L & 2R),
FULLY TIGHTEN ALL CAM LOCK STUDS (13).
STEP 4
Insert one Wooden Dowel (15) into Desk Top (1), attach Support Panel (3) to Desk Top (1) and secure using two Cam Locks (14).
Attach Support Brace (10) to Desk Top (1) and Support Panel (3) using four Short Bolts (12).
FULLY TIGHTEN ALL CAM LOCKS (14)
AND ALL SHORT BOLTS (12).
FS18
BOOKCASE / DESK
ASSEMBLY INSTRUCTIONS
FS18
BOOKCASE / DESK
ASSEMBLY INSTRUCTIONS
STEP 5
Attach both Cross Panels (4) to Side Panel (2L) and secure using two Cam Locks (14) for each Cross Panel (4). Attach Desk Top (1) to
Side Panel (2L) and secure using two Cam Locks (14).
FULLY TIGHTEN ALL CAM LOCKS (14).
STEP 6
Attach Side Panel (2R) to assembly and secure using six Cam Locks (14),
FULLY TIGHTEN ALL CAM LOCKS (14).
STEP 7
Secure Top Back Panel (7) and Bottom Back Panel (8) to assembly using thirty four Short Screws (11),
FULLY TIGHTEN ALL SHORT SCREWS (11).
STEP 8
Insert Shelf Pins (14) into assembly, carefully place Shelves (2) onto Shelf Pins (14).
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE BOOKCASE / DESK.
© Office Star Products August 2009
PART
QTY
9.
Trim Bar . . . . . . . . . . . . . . . . . . . . . 2
10.
Angle Bracket . . . . . . . . . . . . . . . 2
11.
Short Screw . . . . . . . . . . . . . . . . 34
12.
Short Bolt . . . . . . . . . . . . . . . . . . . 8
13.
Cam Lock Stud . . . . . . . . . . . . . 24
14.
Cam Lock . . . . . . . . . . . . . . . . . 24
15.
Wooden Dowel . . . . . . . . . . . . . . 9
16.
Shelf Pins . . . . . . . . . . . . . . . . . . 8
17.
Allen Wrench (not shown) . . . . . . 1
STEP 1
1
PART
QTY
1.
Desk Top . . . . . . . . . . . . . . . . . . . . 1
2.
Side Panel (2L & 2R) . . . . . . . . . . . 2
3.
Support Panel . . . . . . . . . . . . . . . . 1
4.
Cross Panel . . . . . . . . . . . . . . . . . . 2
5.
Support Rail . . . . . . . . . . . . . . . . . . 2
6.
Shelf . . . . . . . . . . . . . . . . . . . . . . . 2
7.
Top Back Panel . . . . . . . . . . . . . . . 1
8.
Bottom Back Panel . . . . . . . . . . . . 1
STEP 4
STEP 5
STEP 6
2L
4
5
6
7
8
10 12
14
17
2R
14
11
6
15
14
1
4
13
13
1
STEP 3
13
2L
2R
13
9
9
STEP 2
3
14
5
15
15
4
4
9
9
