166006
TASK CHAIR
ASSEMBLY INSTRUCTIONS
© Office Star Products February 2010
STEP 1
STEP 2
STEP 3
2
3
5
7
4
6
1
8
PART
QTY
1. Base . . . . . . . . . . . . . . . . . . . . . . . 1
2. Casters . . . . . . . . . . . . . . . . . . . . . 5
3. Pneumatic Cylinder . . . . . . . . . . . . 1
4. Seat Cushion w/ Seat Plate . . . . . . 1
5. Backrest . . . . . . . . . . . . . . . . . . . . . 1
6. Screws . . . . . . . . . . . . . . . . . . . . . . 4
7. Back Support (pre-installed) . . . . . 1
8. Allen Wrench (not shown) . . . . . . . 1
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) snap into place.
STEP 2
Attach Back Support (7) to Seat Cushion w/ Seat Plate (4) using four Screws (6),
FULLY TIGHTEN ALL SCREWS (6)
USING ALLEN WRENCH (8).
STEP 3
Insert Pneumatic Cylinder (3) into Base (1), place assembled seat on top of Pneumatic Cylinder (3) and apply downward pressure.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR
