Adjusting disc brake
If a brake is too tight: use the M5 hex wrench to loosen the screws on the brake
disc tensioner pulley, and slightly shorten the length of the brake cable, then
retighten the tensioner pulley. If the brake is too lose, do the same, but make
the cable longer. Always ensure that the tension pulley is retightened.
Adjusting handle bar
Use the M5 hex wrench to tighten the two screws near the folding
mechanism.
Inflating the wheels
If the rear wheel of the scooter is deflated, use the connecting pipe. For both
wheels, remove the dustcap, then use a pump to inflate the wheel.
Extend Inflator
