O P E R A T O R ’ S M A N U A L
16
Troubleshooting
Problem Observed
Possible
Reason
Recommended Solution
Light Status
Self-propel system and/or
blade do not work
Battery not plugged in
1. Ensure the battery is placed in the
mower and properly plugged in.
2. Unplug and plug battery. Wait 15
seconds.
All lights are Off
Main Switch in Wrong Position
Ensure the Main Switch is turned into
the ON position
All lights are Off
Emergency Stop Button is
Engaged
Ensure the Emergency Stop button is
not engaged. Slightly rotate clockwise
and confirm it pops-up.
All lights are On
LED lights do not turn on
Battery is Depleted or Not
Connected Property
Ensure the battery is in the mower
properly and plugged in with a secure
connection. Unplug and plug battery.
Wait 15 seconds. Ensure battery is
fully charged.
All lights are Off
Self-propel system stops
working during use
High Load Drive Protection may
have been triggered
1. Let go of the control lever
completely until it returns to its
resting place. This will reset the self-
propel system from a high load
safety stop
2. Unplug and plug the battery, wait for
at least 15 seconds.
Not Applicable
Blade stops working
Blade Physically Stuck
Unplug and remove the battery from
the mower. Inspect for debris stuck
under the cutting area. Ensure blade
moved freely
Status Light (farthest to the
left) is Red
Safety Reset – The blade was
Momentarily Under High Load
1. Let go of the control lever
completely until it returns to its
resting place. This will reset the
blade from a high load safety stop.
2. Unplug and plug the battery, wait for
at least 15 seconds.
Status Light (farthest to the
left) is Red
Blade stops while pivoting
around
Control Lever Released Too
Far / Training / Practice
When pivoting around, when slowing
self-propel system, ensure the control
bar is not fully released to its resting
place. There is a control lever position
where the blade stays on but the self-
propel system is not engaged. This
could take practice to maintain the
blade during pivoting.
All lights working
Blade slows down /
performance decrease
Battery needs to be replaced
Follow the instructions to replace the
battery
Battery Light (farthest to
the right) is Red
