2
CONTENTS
1. General information
1.1 Product identification. .........................................4
1.2 CE Marking. ............................................................4
1.3 ErP data. .....................................................................4
1.4 General information ...........................................4
1.5 Handling. ..................................................................5
1.6 Clearances. ...............................................................5
2. lnstallation.
2.1 Health and safety regulations ........................6
2.2 Siting the Super SX .............................................6
2.3 Component check Iist ........................................6
2.4 Supply requirements .........................................6
2.5 Expansion vessels. ..............................................6
2.6 Wall mounting .....................................................6
2.7 Preliminary wiring ................................................7
2.8 Pipework. ..................................................................7
2.9 Electrical connections ........................................7
2.10 Pipe connections ................................................8
2.11 Vessel connections ...........................................8
2.12 Remove the template .....................................8
2.13 Combination valve ...........................................8
2.14 Cold mains supply. ...........................................8
2.15 Hot water outlet .................................................8
2.16 Balanced cold water supply. ........................8
2.17 Expansion vessel (300 litre) ..........................8
2.18 Flexible Y. Hose ...................................................8
2.19 Tundish ....................................................................8
2.20 Secondary return. ..............................................8
2.21 Discharge pipe. ....................................................9
3. Commissioning
3.1 Commissioning and filling. .............................9
3.2 Draining ....................................................................9
3.3 System flushing ...................................................9
4 Electrical installation
4.1 lmmersion heaters. ............................................10
4.2 Wiring of immersion heaters ......................10
4.3 Smart control settings. ...................................12
4.4 Smart technology. .............................................13
4.5 Smart control RED LED indicator ..............14
4.6 Software reset. ....................................................14
4.7 Anti-Legionella Cycle ......................................14
4.8 Smart control OFF PEAK function ............14
4.9 Smart control power supply .......................14
4.10 Smart control technical data .....................15
Symbols used in this manual:
!
WARNING
Could cause serious injury
or death
!
CAUTION
Could cause minor or
moderate injury or damage
to property
DO NOT
!
DO
!
This document should be kept in a
suitable place where it is accessible for
future reference.
5. Safety and servicing
5.1 Safety cut out. .......................................................16
5.2 Intermittent discharge from tundish ...... 16
5.3 Continuos hot discharge from tundish .16
5.4 Expansion vessel maintenance ..................16
5.5 Guarantee. ............................................................16
5.6 Service procedure .............................................16
5.7 Combination valve ...........................................17
5.8 Drain cock .............................................................17
5.9 Alternative discharge. ......................................17
6. OSO fault finding guide
....................................18
7. Technical specification
Commissioning and service logbook ............19
Service interval record .............................................23
8. Guarantee conditions
Guarantee ......................................................................22
8.1 Customer service ................................................22
9. Removing the product
9.1 Removal ...................................................................22
9.2 Returns scheme ..................................................22
