14
7. Maintenance – Read the following information carefully!
>
When cleaning or maintaining the machine, or when replacing parts, the motor is to
be turned off and the power cable disconnected from the power outlet.
>
The power cable may not be run over, pinched, tugged or similarly abused or
damaged.
>
The power cable is to be inspected routinely for any signs of damage.
>
The machine must not be used if the power cable is not in a good condition.
>
For the use or replacement of power and machine cables, only the types stated by
manufacturer may be used.
>
When replacing the connectors for power or machine cables, splash protection and
mechanic durability must remain guaranteed.
>
If the hook and loop fastener is smooth, damaged or strongly discoloured, it should
be replaced to ensure that the machine runs properly.
>
Under no circumstances should highly flammable, combustible, toxic, hazardous,
corrosive or irritant substances be used.
>
Maintenance work may only be performed by approved customer service centres
or by specialists in this field who are familiar with all relevant safety regulations.
8. Technical data
AC electric motor: 230 V; 50 Hz
Sound pressure level: 75dB
Nominal power input: 120 W; 1.9 A
Number of rotations: 3100/min
Ø Hook and loop fastener disc: 240 mm
Working width: 218 mm
Weight: 2.4 kg
Protection class: I
Power cable length: 2 m
Technical modifications reserved.
The above mentioned information is provided to the best of our knowledge however
without any liability. (Version: 03/2020)
