Oshkosh Corporation JLG R2632, Руководство по эксплуатации и безопасности

Страница: 31 / 108

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
31215932
2-9
g.
With the platform elevated on a smooth, firm, level sur -
face with no overhead obstructions, drive the machine
to check if the high drive cutback speed limit is
engaged at the height indicated in Table 2-1. Ensure
drive speed reduces from high speed to a slower speed.
3. With the platform in the stowed position :
a.
Drive the machine on a grade, not to exceed the rated
gradeability, and stop to ensure the drive motor brakes
hold.
b. Check the tilt indicator light to verify proper operation.
The light should be illuminated if tilted beyond allowed
settings shown in Table 2-2.
NOTE: When the tilt indicator warning is activated, drive and lift up
functions are disabled and the platform must be fully lowered
(stowed) to drive.
NOTE: Machine R2632 does not have outdoor functionality in the AUS
market.
Table 2-1. High Drive Cutout Height
MODEL
HIGH DRIVE SPEED
CUTBACK HEIGHT
DRIVE SPEED REDUCTION
R2632 55 in (1.40 m)
2.0 mph (3.2 kph) to
0.5 mph (0.8 kph)
R3246 62 in (1.57 m)
2.2 mph (3.5 kph) to
0.5 mph (0.8 kph)
Table 2-2. Tilt Activation Setting
MODEL
TILT SETTING
(Front to Back)
TILT SETTING
(Side to Side)
Maximum Platform Elevation
R2632 3.5°
1.50° - indoor
1.50° - outdoor
20.5 ft - 25.5 ft (6.25 m - 7.77 m)
18 ft - 21 ft (5.5 m - 6.4 m)
2.25° - indoor
2.50° - outdoor
16.5 ft - 20.5 ft (5 m - 6.25 m)
14 ft - 18 ft (4.3 m - 5.5 m)
3.50° - indoor
4.50° - outdoor
55 in - 16.5 ft (1.4 m - 5 m)
55 in - 14 ft (1.4 m - 4.3 m)
MODEL
TILT SETTING
(Front to Back)
TILT SETTING
(Side to Side)
Maximum Platform Elevation
R3246 3.5°
2.50° - indoor
1.50° - indoor (AUS Only)
1.50° - outdoor
27 ft - 32 ft (8.23 - 9.75 m)
2.75° - indoor
2.25° - indoor (AUS Only)
2.25 ° - outdoor
22 ft - 27 ft (6.7 - 8.23 m)
3.75° - indoor
3.50° - indoor (AUS Only)
3.50° - outdoor
65 in - 22 ft (1.65 - 6.7 m)