Oshkosh Corporation JLG ES1330L, Руководство по эксплуатации и безопасности

Страница: 31 / 98

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
31217186
2-9
g.
With the platform elevated on a smooth, firm, level sur -
face with no overhead obstructions, drive the machine
to check if the high drive cutback speed limit is
engaged at the height indicated in Table 2-1. Ensure
drive speed reduces from high speed to a slower speed.
NOTE:
For Japan spec machines, the machine will not drive when ele -
vated above 1.9 m.
3.
With the
platform in the stowed position
:
a.
Drive the machine on a grade, not to exceed the rated
gradeability, and stop to ensure the drive motor brakes
hold.
b. Check the tilt indicator light to verify proper operation.
The light should be illuminated if tilted beyond allowed
settings in Table 2-2.
NOTE: When the tilt indicator warning is activated, drive, lift up, and
steer functions are disabled and the platform must be fully low -
ered (stowed) to drive.
NOTE: In the Japan market, ES1330L is not available.
NOTE: In the Japan and AUS markets, ES1530L is rated for INDOOR USE
only.
Table 2-1. High Drive Cutout Height
MODEL
HIGH DRIVE SPEED
CUTOUT HEIGHT
DRIVE SPEED REDUCTION
ES1330L
37.4 in (0.95 m)
2.0 mph (3.2 kph) to
0.5 mph (0.8 kph)
ES1530L
Table 2-2. Tilt Activation Setting
MODEL
TILT SETTING
(front to back)
TILT SETTING
(side to side)
Maximum Platform Elevation
ES1330L
(AUS Market)
3°
1.5° - indoor
37.4 in - 11 ft (0.95 m - 3.35 m)
11 ft - 13 ft (3.35 m - 3.96 m)
1.5° - outdoor 37.4 in - 13 ft (0.95 m - 3.96 m)
ES1330L
(All Other
Markets)
3°
2.25° - indoor 37.4 in - 11 ft (0.95 m - 3.35 m)
1.75° - indoor 11 ft - 13 ft (3.35 m - 3.96 m)
1.5° - outdoor 37.4 in - 13 ft (0.95 m - 3.96 m)
ES1530L 3°
3.25° - indoor
37.4 in - 11 ft (0.95 m - 3.35 m)
11 ft - 13 ft (3.35 m - 3.96 m)
2.5° - indoor 13 ft - 15 ft (3.96 m - 4.57 m)
1.5° - outdoor 37.4 in - 10 ft (0.95 m - 3.05 m)