Oshkosh Corporation JLG 830P, Руководство по эксплуатации и безопасности

Страница: 37 / 56

SECTION 3 - MACHINE OPERATION
3-8
31215862
Positioning and Leveling Machine
1.
Position machine under work area on a firm, level, and
uniform supporting surface.
2. Check that ALL wheels front and rear are in contact
with the supporting surface.
3.
Check that the bubble level indicator is centered and
machine is level.
1. Lock the front castor wheels to prevent the machine
from rolling.
Entering/Exiting The Platform
DO NOT EXCEED MAXIMUM PLATFORM CAPACITY. MAXIMUM CAPACITY
INCLUDES PERSONNEL IN PLATFORM PLUS WEIGHT IN TOOL TRAY OR ANY
OTHER WEIGHT PLACED IN PLATFORM.
1.
Always maintain “three point contact” with the
machine, using two hands and one foot or two feet
and one hand at all times during entry and exit.
2.
Attach the lanyard to the lanyard attachment point to
the left of the manual box on the mast.
3. Ensure the platform gate is fully closed upon entry.
4. Once in the platform and the entry gate fully closed,
the platform is ready for the operation.
BEFORE OPERATING PLATFORM CHECK AROUND AND OVERHEAD FOR ANY
OBSTACLES OR PERSONNEL THAT MAY COME INTO CONTACT WITH MACHINE
WHILE ELEVATING OR LOWERING THE PLATFORM. IF NECESSARY, EXIT
MACHINE AND REPOSITION BEFORE PROCEEDING.
5.
Before exiting the platform, be certain platform is fully
lowered.
/HYHO 127/HYHO
To
order
go
to
Discount-Equipment.com