Oshkosh Corporation JLG 3394RT, Руководство по эксплуатации и безопасности

Страница: 29 / 100

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION AND INSPECTION
2-8 – JLG Lift – 3121132
Function Check
Perform the Function Check as follows:
1. From the ground control panel with no load in the plat-
form:
a. Check that all switch guards are in place;
b. Operate all functions. Reference Section 4, Machine
Operation;
c. Check auxiliary power (or manual descent) (Refer to
the auxiliary power (or manual descent) sections of
this manual for proper operating procedures.);
d. Ensure that all machine functions are disabled
when the Emergency Stop Button is activated.
2. From the platform control console:
a. Ensure that the control console is firmly secured in
the proper location;
b. Check that all switch guards are in place;
c. Operate all functions and check all limiting and cut-
out switches. Reference Section 4, Machine Opera-
tion, See Table 2-2 and Table 2-3;
d. Ensure that all machine functions are disabled
when the Emergency Stop Button is activated.
Table 2-2. Maximum Cutout Height
Model High Drive Cutout
3394RT 6-9 ft (1.9-2.7 m)
4394RT 7-10 ft (2.1-3 m)
Table 2-3. Tilt Cutout Settings
Model Front to Back Side to Side
3394RT
(ANSI, Aus)
5° to full height
5° to 26 ft (8 m)
4° to 30 ft (9 m)
3° to 33 ft (10 m)
4394RT
(ANSI, Aus)
5° to full height
5° to 26 ft (8 m)
4° to 30 ft (9 m)
3° to 43 ft (13 m)
3394RT/4394RT
(CSA)
3° to full height 3° to full height
3394RT/4394RT
(CE)
5° to full height 3° to full height