![background image](http://html1.mh-extra.com/html/oshkosh-corporation/jlg-330lrt/jlg-330lrt_operation-and-safety-manual_1655771052.webp)
SECTION 3 - MACHINE CONTROLS, INDICATORS, AND OPERATION
31217156
3-17
3.7 PLATFORM MANUAL DESCENT CONTROL
The platform manual descent control is used in the event of total
power failure to lower the platform using gravity. The manual descent
control T-handle is located on the front right of the machine. Look for
the instruction decal located beside the release handle.
The lowering procedure is as follows:
1.
Locate the manual descent control T-handle.
KEEP HANDS AND ARMS OUT OF THE PATH OF THE SCISSOR ARMS AND PLATFORM
WHILE LOWERING.
2.
Grasp the T-handle and slowly pull out to lower the scissor
arms/platform. When the platform is lowered to desired
level, allow the T-handle to return to its closed position.
To
order
go
to
Discount-Equipment.com