INTRODUCTION
31215825
A-1
SECTION A. INTRODUCTION - MAINTENANCE SAFETY PRECAUTIONS
A. GENERAL
This section contains the general safety precautions which
must be observed during maintenance of the Mobile Elevat
-
ing Work Platform. It is of utmost importance that mainte
-
nance personnel pay strict attention to these warnings and
precautions to avoid possible injury to themselves or others or
damage to the equipment. A maintenance program must be
established by a qualified person and must be followed to
ensure that the machine is safe to operate.
MODIFICATION OF THE MACHINE WITHOUT CERTIFICATION BY A RESPONSIBLE
AUTHORITY THAT THE MACHINE IS AT LEAST AS SAFE AS ORIGINALLY MANUFAC
-
TURED IS A SAFETY VIOLATION.
The specific precautions to be observed during machine main
-
tenance are inserted at the appropriate point in the manual.
These precautions are, for the most part, those that apply
when servicing hydraulic and larger machine component
parts.
Your safety, and that of others, is the first consideration when
engaging in the maintenance of equipment. Always be con
-
scious of component weight and never attempt to move
heavy parts without the aid of a mechanical device. Do not
allow heavy objects to rest in an unstable position. When rais
-
ing a portion of the equipment, ensure that adequate support
is provided.
SINCE THE MACHINE MANUFACTURER HAS NO DIRECT CONTROL OVER THE FIELD
INSPECTION AND MAINTENANCE, SAFETY IN THIS AREA IS THE RESPONSIBILITY
OF THE OWNER/OPERATOR.
B. HYDRAULIC SYSTEM SAFETY
1.
It should be particularly noted that the machines
hydraulic systems operate at extremely high and poten
-
tially dangerous pressures. Every effort should be made
to relieve any system pressure prior to disconnecting or
removing any portion of the system.
2.
Relieve system pressure by lowering the platform com
-
pletely to direct any line pressure back into the return
line to the reservoir. Pressure feed lines to system com
-
ponents can then be disconnected with minimal fluid
loss.
C. MAINTENANCE
FAILURE TO COMPLY WITH SAFETY PRECAUTIONS LISTED IN THIS SECTION COULD
RESULT IN MACHINE DAMAGE, PERSONNEL INJURY OR DEATH AND IS A SAFETY
VIOLATION.
• REMOVE ALL RINGS, WATCHES, AND JEWELRY WHEN PER
-
FORMING ANY MAINTENANCE.
• DO NOT WEAR LONG HAIR UNRESTRAINED, OR LOOSE FIT
-
TING CLOTHING AND NECKTIES WHICH ARE APT TO
BECOME CAUGHT ON OR ENTANGLED IN EQUIPMENT.
• OBSERVE AND OBEY ALL DANGER, WARNING, CAUTION
AND OTHER INSTRUCTIONS ON MACHINE AND IN SERVICE
MANUAL.
• KEEP STANDING SURFACES AND HAND HOLDS FREE OF
OIL, GREASE, WATER, ETC.
• NEVER WORK UNDER AN ELEVATED PLATFORM UNTIL
PLATFORM HAS BEEN SAFELY RESTRAINED FROM ANY
MOVEMENT BY BLOCKING OR OVERHEAD SLING.
• BEFORE MAKING ADJUSTMENTS, LUBRICATING OR PER
-
FORMING ANY OTHER MAINTENANCE, SHUT OFF ALL
POWER CONTROLS.
• BATTERY SHOULD ALWAYS BE DISCONNECTED DURING
REPLACEMENT OF ELECTRICAL COMPONENTS.
• KEEP ALL SUPPORT EQUIPMENT AND ATTACHMENTS
STOWED IN THEIR PROPER PLACE.
• USE ONLY APPROVED, NONFLAMMABLE CLEANING SOL
-
VENTS.
• ENSURE REPLACEMENT PARTS OR COMPONENTS ARE
IDENTICAL OR EQUIVALENT TO ORIGINAL PARTS OR COM
-
PONENTS.
Go
to
Discount-Equipment.com
to
order
your
parts
