OSEE XCM-240, Руководство пользователя

Страница: 39 / 74

Functionality of the Main Menu
33
5.1.5
DISPLAY Menu
The DISPLAY menu items are used to adjust the parameters displayed on
the screen, the menu items are as shown in Figure 5.1-10:
CLOSE CAPTION
AUDIO
CONFIG
COLOR TEMP
FUNCTION KEY
GPI
MAIN
DISPALY
MARKER
INPUT SELECT
STATUS
IMD
KEY INHIBIT
LINE WAVE NUMBER
STATUS DISPLAY
AFD DISPLAY
WFM POSITION
WAVE FORM TYPE
LINE WAVE
WAVE OVER LIMIT
WAVE UNDER LIMIT
WFM TRANS
DISPLAY
---
AUTO
OFF
LEFT
WAVE FORM
OFF
50
0
OPAQUE
TIME CODE OFF
Figure 5.1-10 DISPLAY SETUP Menu
The relationship of Items, Default Value, Domain Range and Description
of the sub-item is shown in Table 5.1-5:
Table 5.1-5 The Description of DISPLAY SETUP Menu Items
Items
Default
Value
Domain Range Description
STATUS
DISPLAY
AUTO OFF/ON/AUTO
Set whether to display STD
information.
If the signal input is not equal to
"No signal" and this item is auto,
the status information will show
15 seconds when the status
changed, and then closed
automatically.
AFD
DISPLAY
OFF OFF/ON
Set whether to display AFD
information.
ON is an effective value to AFD
DISPLAY item only if the value
of STATUS DISPLAY is AUTO or
ON.
WFM FORM NORMAL  MODE1 Switch the display mode among