OSEE XCM-240, Руководство пользователя

Страница: 24 / 74

XCM-240 Features
18
ON OFF
Figure 4.2-2 Power Switch
2.
Power Input
It provides one power input interface, the specification is 19V4.74ADC.
The corresponding indicator is at the front panel. If the light is green, the
monitor is powered on, if the light is flashing, the monitor is standby, and
if the light is off, the monitor is powered off.
 Only use the adapter and the power cord specified by the manufacture for
your safety
！
3.
Video Input Interface (BNC)
It provides two SDI input interfaces, one is labeled as SDI1 IN, and the
other is SDI2 IN.
4.
HDMI
It provides one HDMI input interface, HDMI Type-A connector with a
fastener.
5.
Video Output Interface (BNC)
It provides two SDI output interfaces. One is labeled as SDI1 OUT, the
other is SDI2 OUT, active loop.
6.
Ethernet (RJ-45)
It provides one 10/100M Ethernet connector. It is used to connect with a
computer to modify the network settings.
7.
GPI (DB9)
It assigns a function to each pin of the GPI interface to realize a remote
control mode. Define a function to the GPI pin. Refer to “5.1.10 GPI
Menu” for the definition of the pins and the functions.
The relationship of the pins of GPI interface and its channel value is
shown in Table 4.2-1.
Table 4.2-1 The Relationship of GPI Pins and Channel Values