Locations and Function of Parts and Control
7
Figure 3.1-4 Right View of WVT-501 Receiver
WVT-501 Transmitter
WVT-501 Receiver
Interface
SDI IN(BNC)
SDI1 OUT(BNC)
SDI OUT(BNC, loop out)
SDI2 OUT(BNC)
HDMI IN(Type A)
HDMI OUT(Type A)
Antenna (PR-SMA Male)
Antenna(PR-SMA Male)
DC IN(2pins LEMO)
DC IN(2pins LEMO)
TALLY OUT(3.5mm)
TALLY IN (3.5mm)
1.
Power Input
Plug the power supply to this interface to provide power to the device.
The DC input voltage range is 7
～
17VDC.
2.
Power Switch
Press this part to switch on or switch off the power.
Push the button to the “ON” side to switch on the power, and the OLED
screen is lit up.
Push the button to the “OFF” side to switch off the power, and the OLED
screen is lit off.
y
It lasts about one minute for starting operation, and please don’t do any
operations during starting the device.
y
There are four antenna interfaces at the top of WVT-501 unit, and five
1/4” inch thread interfaces at the bottom.