SRA6802N SD-SDI Dual Distribution Amplifier - 5 -
Step2
Step3
Step 4
Step5
Fig. 2-1
Installation of 2U Frame of 6800N Series
Locate the position for back connector and insert the back connector
Fasten the screw to fix the back connector.
Locate the slot for module.
Get the module installed in the slot, push the module slightly along the slot, press module again to
confirm that the module is installed firmly and then close swivel handle.
Install the front panel.
Making the Connections
Please connect signals based on Fig. 1-2.
Removing the Module
Follow the following steps to remove SRA6802N module:
1.
Open the front part of frame.
2.
Open the swivel handle to the full.
