User Manual for RM7023 - 5 -
Chapter 4 Using the RMS5032
4.1 Status Display of the Screen
1.
Tally Light
: This tri-color (red/green/amber) light is controlled through a DB9
connector on the rear panel. For more information about the DB9 connector, refer to
“Rear Panel” on Chapter 4.4.
2.
Input Signal Format
: It displays the input signal format and can be set in the MAIN
Menu.
3.
Safe Areas
: Multiple safe areas are configurable in the
MAIN Menu
.
4.
Audio Meters:
Levels for the audio .For RMS5032-SC, only two meters on the left
side.
5.
IMD:
The MAIN Menu
provides settings to customize the
IMD
(In-Monitor Display)
text area to show a line of characters, numbers, and/or some symbols.
6.
Time Code:
The de-embedded time code from the HD/SD-SDI source displays in the
top right corner.
7.
Waveform and Vector scope:
The signal waveform and vector scope are configurable
in the
MAIN Menu
.
Referring to the circumstance of no sync ( power on):
1.
Will indicate on the top left hand of screen: IN A: NO SYNC
2.
On the bottom of screen will IMD and METER be shown, but the display of IMD
and METER is subject to the current main menu setting. When in the main menu
IMD DISP is set to ON and, no video input, IMD will display; when it is set OFF,
IMD won’t be displayed. The same applies to the display of METER.
3.
The main menu can still be displayed, but the value of parameter relating to image
Audio Meters
IMD
Time Code
Waveform or Vectorscope
LED Tally Light
OSD Tally
Input Signal
format
Safe Marker