OSEE LMW-4320, Руководство пользователя, Страница: 43 / 59

Functionality of the Main Menu
37
appointed transparency.
For example, set ASPECT as 16:9, AREA MARKER as 4:3, and SAFETY
AREA as 95%, then, the comparison of the three MARKER MATs are as
shown in Figure 5.1-14:
Figure 5.1-14 MARKER MAT
3.
MARKER FIT
The
USER CONFIG

Marker Fit
item is used to whether set up the
connection between area marker and safety marker.
Set Marker Fit item as OFF, the safety area is based on the whole current
image display, while Set
Marker Fit
item as ON, the safety area is in the
range of area marker, the comparisons are as shown in Figure 5.1-15
Figure 5.1-15 MARKER FIT

The AREA MARKER, CENTER MARKER and SAFETY MARKER feature
are available only when the MARKER item is set to ON.

The safety marker area will change with the area marker when setting
Marker Fit item to be ON.

The cross hatch lines will display only in the single image or in PIP mode
when
CROSS HATCH
is
ON
.