BDA6801N/UDA6801N Operating Manual
Specifications are subject to change without notice.
—
6
—
Step 4
Step5
Fig. 2-1
Installation of 2U Frame of 6800N Series
Locate the position for back connector and insert the back connector
Fasten the screw to fix the back connector.
Locate the slot for module.
Get the module installed in the slot, push the module slightly along the slot, press module again to
confirm that the module is installed firmly and then close swivel handle.
Install the front panel.
2.4
Making the Connections
Please connect
A
ES audio signals based on the types of module input signal and the connectors showed
in Fig. 1-2.
2.5 Removing the Module
Follow the following steps to remove BDA6801N/UDA6801N module:
1.
Open the front part of frame.
2.
Open the swivel handle to the full.
3.
First make sure the frame stands firmly, and then pull the module gently along the slot till out
of frame.
4.
Install the front panel.