BCM-230 Series LCD Monitor
User Manual
5
Chapter 3 Product Introduction
Unpackaging and installation
Opening the box, please check whether the device has been damaged during transport. Check all the
things listed on the packing list are received. If there is any missing, contact your distributors or Beijing
Osee Digital Technology Ltd. for it.
We recommend that you should save the packing materials for future needs.
1.
Install the pedestal following the iinstallation instructions.
Note: The pedestal and the monitor are packaged separately.
2.
Put the monitor on the position you need for installing, and connect the power. Please make sure the
place you put is safety.
3.
Connect a standard signal lines to the corresponding input port. All BNC connector impedance must
be 75
Ω
.
Note: Please use the power adapter supplied to avoid unnecessary trouble.
4.
Use the power adapter and cord to connect single-phase three-wire AC power or following the local
power supply conditions. Make sure the power cord grounding well.
5.
Finally, turn on the power switch, so that the device will be ready for work.
