5
4
Parts
Operation
1.
On/O Button
2. Optical Source
3. Vol ume +/-
4. Previous/Next
5. Line In Source
6. Play/Pause
7.
AUX Source
8. Mute
9. Bluetooth Source
1.
Connect the power cord to the back of the
amplifier then connect it to a wall outlet.
2. Connect your devices to a suitable input (more
instructions on page 6).
3. Turn the power button to the On position, after
two seconds the unit will enter working status
and the input indicator will lit up.
4. Press the Bluetooth, OPT, LINE or AUX button
on the remote or the vol ume knob to cho ose a
audio source.
Control the playback via the remote control by
pressing the buttons.
Note:
The amplifier will shut o automatically
if the temperature exceeds 185°F, to indicate
this the Power indicator will turn orange. The
amplifier will re-start automatically when the
temperature has dropped below 140±10°F.
Bluetooth Pairing:
1.
Press the Bluetooth on the remote to activate
the Bluetooth source.
2. Activate Bluetooth on your phone/tablet and
start searching for new Bluetooth devices.
3. When your phone/tablet finds OSD NERO XD,
choose this unit and begin pairing up.
2
1
3
4
5
6
7
8
9
Operation
Connect Your Device:
Connect your subwoofer to SUB out.
Connect your CD player via its RCA cable to
the RCA L/R input. Make sure you connect
the “L” plug to the left input channel and the
“R“ plug to the right input channel.
Connect your phone/tablet/MP3 via an AUX
cable to Line In.
Connect your DVD player via its optical fiber
cable to the Optical Input.
Connect your speakers to the Speaker
Output. Make sure you connect the -/+ and
the L/R cables to the right input.
Note:
Remember to press the desired source
button on the remote control for the audio
source to work.
