OSD Audio GLS8, Инструкция по установке

Страница: 3 / 4

System Diagrams
Step 3
Connect to a Mono Subwoofer Amplifier such as the OSD SMP250. Please note, the red lead indicates positive signal (+) and the
black indicates negative signal (-). Connecting the positive and negative leads incorrectly will cause it to be out of phase and will result
in weaker bass response. (See Diagram 3) Remove 2”- 3” of the outer layer of the speaker wire. Carefully strip ½” of the insulation
covering the speaker conductors within the outer layer and connect to the speaker outputs on the amplifier.
For optimum performance combine the GLS8 with our LS2 landscape satellite speakers. Create an unobtrusive stealthy outdoor
sound system with the following system diagrams. Additional system configurations can be created for up to 8 pairs of speakers using
multichannel amplifiers and or series parallel wiring.
Note: Please consult your electronics manual for Impedance and Power Rating before wiring a multi speaker system.
GLS 8 INSTALL GUIDE
SMP250 AMPLIFIER
SMP250 (Mono)
SMP250 (Mono)
AMP/RECEIVER
AMP/RECEIVER
Diagram 3