OSCO JH-DC, Руководство по установке

Страница: 3 / 24

3
JH-DC OPERATOR INSTALLATION GUIDE
FIGURE 1
FIGURE 2
1. Remove drive sprocket from JH-DC operator
drive shaft.
2. Slide proper door shaft sprocket onto door
shaft, with key inserted into key way.
3. Slide spreader arm assembly onto the door
shaft.
4. Make any necessary adjustments in
spreader arm so lower end will slide onto
operator drive shaft.
5. Slide drive sprocket onto drive shaft and
tighten set screw securely.
6. Now position door shaft sprocket so it is
exactly in line with the drive sprocket and
tighten set screw securely.
7. Slide 1” shaft collar onto door shaft and
tighten.
8. Place roller chain around sprockets and
attach master link.
9. Attach wall retainer bracket onto wall for
securing disconnect cable.
INSTRUCTIONS FOR ATTACHMENT OF
SPREADER ARM AND DOOR SPROCKET
Note: This operator is designed to operate a
maximum pull of 90 lbs, and is rated for 15 full
cycles of operation per hour maximum.
(OPTIONAL)
1-06-6