Depending on which DHCP opton is enabled (or disabled) on the
General Settings
page, this
page will show appropriate information.
If DHCP server is enabled then you can configure it’s operational parameters on this page.
Server Enabled on Interface
– Choose the interface the DHCP server should listen for
requests on. You can choose either Wired or Wireless interface.
Offered IP Starting Address
– First IP address from the range that will be provided to hosts
requesting DHCP server to provide them an address.
Offered IP Ending Address
– Last IP address from the range that will be provided to hosts
requesting DHCP server to provide them an address.
Default Subnet Mask
– Subnet Mask that will be provided to hosts requesting IP information.
Default Gateway IP
–
Gateway IP address that will be provided to hosts requesting IP
information.
First DNS Server IP
–
First
DNS IP address that will be provided to hosts requesting IP
information.
Second DNS Server IP -
Second
DNS IP address that will be provided to hosts requesting IP
information.
Lease Time in Minutes –
Lease time the information received from DHCP service is valid. After
that time computer that has requested the DHCP server to provide it IP addres information will
automaticaly request that information again.
Static Mapping
– This option allows static mapping of MAC addresses to specific IP addresses
offered by DHCP server.
Содержание 5GXi
