D
eluxe
Massage Chair
D
eluxe
Massage Chair
Assembly method
Lay the electric wire inside
the remote control bracket
and fix the remote control
bracket with four
screws.
Fix the pillow cushion with
backrest by using of zipper
All above steps are done, connect main remote
control, auxiliary remote controller,and U disc
into the related jacks, then connect power,
switch on and start working.
Step 1
Unpack the carton
and take chair out
of carton by at least
four people
Connect air bag tubes and stick seat cushion
Prohibit holding here
Zipper
PREPARATIONS BEFORE USE
Instructions on buttons
Full auto modes area
Semi-auto modes area
Heater connector
Step 3
Step 4
Step 6
Step 5
Step 2:
Unfolding the backrest to 115 ,
a reminding sound means backrest locked.
NAME AND FUNCTION FOR EACH PART
Turn on/off massage functions.
When power on, VFD is lightened on, function buttons and memory buttons are flashing for
users' selection.
When power off, massage chair resets, at this moment, all buttons are invalid. button
keeps flashing to start standby mode. After reset, VFD will be shut off.
Full automation: There are four automation from RECOVERY, EXTENT, RELAX and
REFRESH to cater for different ages of people.
Neck & Shoulder AUTO: Select neck and shoulder automatic programs.
Back & Waist AUTO: Select back and waist automatic programs.
Air bags AUTO: Turn on/off air bags automatic programs
Air bags strength: There are five air forces for selection. When it reaches.
minimum/maximum point, a double sound alarm will be heard.
Turn on/off seat vibration.
Vibration intensity adjustment: There are five vibration intensities for selection.
When it reaches minimum/maximum point, a double sound alarm will be heard.
Turn on/off back heating function.
Turn on/off soles heating functions.
Fig 1
Fig 2
Fig 3
Fig 4
Fig 5
Fig 6
Air bag tube
Motor plug
