Always wear the appropriate
personal protection
2
SYMBOLS USED WITH THIS PRODUCT
Recycle
See page 12
WEEE
See page 12
3 pin plug
required
European
Conformity
Warning
RoHS
See page 12
X
Man, Earth and the Universe are forces that creats an
immovable centre of balance . . .
the
balance of power
“
“
Osaki Power Tools are committed to the Production of a range of Quality Power Tools
that are designed for high performance and long service life. By following the
recommended safety and maintenance procedures they will last for many years.
Read operator’s
manual
Dress
appropriately
WORK AREA CAUTION
1.
Keep your work area clean and well lit.
Cluttered
benches and dark areas will invite accidents.
2.
Do not operate power tools in explosive
environments.
for example; in presence of
flammable liquids, gases, or dust. Power tools
create sparks which may ignite the dust or
fumes.
3.
Store tools out of reach of children or other
untrained persons.
Tools are dangerous in the
hands of untrained users.
4.
Keep bystanders and children away while
operating the power tool.
Distraction can
cause you to loose control.
ELECTRICAL SAFETY
1.
Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adaptor plugs with earthed (grounded)
power tools. Matching plugs and outlets will
reduce risk of electric shock.
2.
Avoid body contact with grounded surfaces
s u c h a s p i p e s , r a d i a t o r s , r a n g e s a n d
refrigerators.
There is an increased risk of
electric shock if your body is grounded.
3.
DO NOT expose power tools to rain or wet
conditions.
Water entering a power tool will
increase the risk of electric shock.
4.
DO NOT abuse the cord.
Never use the cord to
pull the plug from an outlet. Keep the cord
away from heat, oil, sharp edges or moving
parts. Damaged cords should be replaced
immediately by qualified repair personnel.
Damaged cords will increase the risk of
electric shock.
5.
W h e n o p e r a t i n g t h e g r i n d e r i n a d a m p
l o c a t i o n o r o u t s i d e , u s e a h e a v y d u t y
extension cord
in conjunction with a residual
current device (RCD) rated at 30mA or less.
OTHER OSAKI PRODUCTS
OSA-279-8000K_Instructions.qxd 21/06/2011 12:50 Page 2
