THE ADJUSTMENT BEFORE MASSAGE
Environment
_&
Caution
•
Don't use the chair in wet places like
near the swimming pool and bath room
to avoid leakage or electric shock.
@
Don't use under the sunlight or near
stove or other heating place to avoid
upholstery being deteriorated .
•
Please use chair in a flat place to avoid
chair falling or noise or other
unexpected troubles.
•
Check places in front
Check the areas when back and leg are
extending, make sure no people, pets or
other things are around.
•
Check power cable, plug
[1 ]Clean the dust on plug on time.
[using dry cloth].
[2]No damage, re-do, bend, stretch, tie or
press with heavy thing[especially can't be
pressed by the chair] on power cable.
s
www.o
s
a
d
ain
d
ia.com
Check environment
Space size for using the chair
•
At lec)st 4 Inches from wall .
•
At least 11.8 Inches in front of the leg.
Check surroundings
When the backrest or legrest reclines or
extends, please pay attention to:
[1 ]Check any person or things in every
direction.
[2]Check the space size.
INSTALLATION
Installation
Step 2. Massage chair position return
After take out the main chair body,
CD
Take out the power cord, insert one end of power cord
to the socket on power box, another end insert into power socket. a>Turn on the power
switch on power box.massage chair in power on status, backrest goes up and seat goes
down. GD After backrest return, turn off the switch.unplug the power plug.[Refer to step 7,
after the assembly]
Step 3. How to assemble the leg rest
Massage chair position
return state
Install the legrest to the main body,
CD
Unscrew the bolt from hanger of legrest. mconnect 3
air pipes on leg rest with air tap on main body, from left to right is grey, brown and black pipe.
GD Connect power line with power socket tight.@ raise the rotation shaft board on hangers,
raise the leg rest with hands, put rotation shaft into hangers on main body, and put rotation
shaft board down. ®screw it back tight.
Socket Air nozzle
®@
D . • .
'
�
I
Grey Brown Black
Hanger
�
n
[
TI
<
-
Air hoses connect with
� �
the air nozzle and power
,.
CD
Bolt
line plug connect with
the socket
axis cover and
screw on the
bolt
