OS STP-HM-MRK2, Инструкция по эксплуатации

Страница: 4 / 11

4
STP12720E
<Overview>
<Left-side view>
Materials
：
Aluminum (Front panel
、
Case
、
Roller)/Steal( Case cap etc.)/ Resin (Cap(ABS)
、
Others(POM
、
PC))
※1
The drawing refers to the sliding brackets.
※2
The trigger input corresponds with the projector with trigger output( DC12V).
The tally sends 5V output while operating, and displays the function status on the system controller.
Construction
Cautions in handling
■
The surface of the screen is specially processed to enhance projection image. The contamination
or damage may result in poor projection image. Pay close attention to the followings when
handling this product.
●
Do not touch the screen surface.
●
Do not draw anything on the screen surface.
●
Do not rub or scratch the surface with anything hard.
●
Gently wipe the dust off the surface with the soft dry cloth or remove with a soft brush.
■
The screen surface may have an odor at first. Please ventilate enough by opening the window. Any
such odor will gradually fade. When the odor is strong, please keep the screen pulled out, even not
in use.
●
Be careful in repeating the screen going up and down. The continuous use of the up and down
operations may cause the heat prevention circuitry work, and stop the screen. When this
happens, please operate after some time (10 – 20 minutes) for cooling off.
(※
This is not the
breakdown .
)
Never use a moist cloth or chemicals such as benzene, thinner etc.
It may cause the poor projection image.
Case
Bracket
※1
Front panel
Black mask
Power supply
Weight bar
Tension adjustment knob
Trigger Cable Assignment
No. Cable color Assignment
1 Black Trigger IN
2 Red Trigger GND
3 Blank Blank
4 Blank Blank
5 Green Tally GND
6 Yellow Tally OUT
Trigger Input/Tally
Output
※2
IR receiver Input
Wall switch Input
Power supply