Ortus LUN-7T, Руководство по установке

Страница: 12 / 34

9.2. "Lind-9" indication and control device
"Lind-9" ICD can be in the scope of supply of the Control Panel.
Connection diagram is shown in Figure 9.
Attention! When Control Panel operates with "Lind-9" ICD, the remote LED is connected to
AUX contact (see Figure 9).
9.2.1. Control and indication elements
The appearance of ICD is shown in Figure 2. The front panel of ICD has LEDs that indicate the
operation modes and the system status in general, as well as the buttons to control the operation
of the Control Panel:
Fiiure 2. General view of ICU "Lind-9"
ARMED (red LED) – lit in the "armed" state;
EVENT REPORTING (red LED) – displays the message transmission to CMS, and shows there
are not sent events in the memory;
ZONE 1...8 (red LEDs) – zone status indication. Glowing LEDs indicate the alarmed zones;
BYPASS (yellow LED) – system LED; it is lit when any functions of the device are disabled (not
used);
FAU LT (yellow LED) – system LED; it is lit when failures occur;
ZONE 1...8 (yellow LEDs) – zone failure indication (short circuit, break off, detectors power
failure) (not used);
POWER 220V (yellow LED) – displays troubles with the device prime power supply (230 V
power failure);
CP CONNECTION (yellow LED) – fashes in case of communication failure between ICD and
Control Panel;
CMS CONNECTION (yellow LED) – fashes in case of CMS communication failure;
БААИ.425523.003ИУ Rev. en_19 12