Ortopedia TOURING 926, Руководство по эксплуатации

Страница: 15 / 37

29 28
5.2.2 Standard backrest
Tools:
1 x 13 mm open-end or ring spanner
1x hexagonal stud wrench WW* 6
The angle of the standard backrest (Fig.
42/
➀
) can be infinitely adjusted be-
tween approx. 0° to 5° with the adjust-
ment screw and the lock nut.
5.2.2.1 Folding down the
backrest
Screw far out the clamping screw (Fig.
43/
➂
) at both sides. Pull up the backrest
and then fold it forwards.
5.2.2.2 Folding upright the
backrest
Bring the backrest into the upright posi-
tion, then press it fully down and tighten
the clamping screws (Fig. 43/
➂
).
WW* = Wrench width (mm)
3
43
42
5.2 Backrest
5.2.1 Attaching/detaching the
ERGOpor backrest element
5.2.1.1 Detaching the ERGOpor
backrest element
Slacken the securing screws (Fig. 40/
➀
)
of the clamps and push them inwards.
Then push the backrest element for-
wards out of the backrest frame (Fig.
41).
5.2.1.2 Attaching the ERGOpor
backrest element
Press the backrest element, left and
right, onto the backrest frame (Fig. 41).
Push the securing screws (Fig. 40/
➀
) of
the clamps outwards and then tighten
them.
5.2.1.3 ERGOpor backrest cush-
ion
The ERGOpor backrest cushion (Fig.
41.1/
➁
) is secured to the backrest shell
with Velcro fasteners and can be pulled
off.
40
41
2
41.1
1
1