Ortopedia solero 9.072, Руководство по эксплуатации

Страница: 49 / 64

49
Strapping on the lap belt with
lock
▲
Pull both belt halves to the front
and slide the catch halves together
so that they latch together (fig. 61).
Then carry out a pull test.
You open the lap seatbelt by pressing
in the red unlocking button (fig. 61/
➀
).
Putting on the lap seatbelt with
velcro fastener
▲
Guide the belt end with the Velcro
strip through the clasp and then
close the Velcro fastener. Then car-
ry out a pull test.
!
Attention:
Make sure that no objects are
trapped between belt and the
body! – Thus you avoid painful
pressure points.
☞
Note:
The lap seatbelt should not be too
tight.
61
1