background image

7

6

2. Handling the wheelchair

2.1 Use

The 

Impuls-ORTOform

 wheelchair is a

therapy wheelchair for the domestic and
geriatric care.

The 

Impuls-ORTOform

 offers an uphol-

stered seat, an angle-adjustable, uphol-
stered backrest and a seat depth adjust-
ment with variable drive wheel position
for a comfortable, relaxed sitting.

The 

Impuls-ORTOform

 is designed for the

daily use indoors and outdoors.

Before being used for the first time, the
wheelchair should be adjusted by your
ORTOPEDIA dealer. The adaptation will
take into account the driving experi-
ence, the physical limits of the user and
the main place of use of the wheelchair.

!

Attention:
Setting or adjustment should only be
carried out by an authorised ORTO-
PEDIA dealer.

1. Introduction

Thank you for choosing a wheelchair
from the IMPULS model range.

With its many design versions and acces-
sories, 

Impuls-ORTOform

 wheelchair sys-

tem can be adapted to suit your varying
clinical needs.

Like any other vehicle, a wheelchair is a
technical aid. It requires explanations for
use and a degree of maintenance. It also
has hidden dangers that may appear if it
is used incorrectly. The correct handling
must therefore be learned.

These instructions are intended for use in
conjunction with the booklet "Safety In-
formation for Mechanical Wheelchairs",
to help you to familiarise yourself with the
operation of the wheelchair and to pre-
vent accidents.

Children should read these instructions
and the booklet "Safety Information for
Mechanical Wheelchairs" with their par-
ents, guardian or carer before venturing
out for the first time.

Note:
Please note that the equipment ver-
sions illustrated may differ from your
model.

Содержание Impuls ORTOform






























Отзывы: