Orthoquad RS1200, Руководство пользователя

Страница: 7 / 14

V. OPERATING YOUR RS1200
1. TURN POWER ON
Insert the key into the key switch on the upper tiller and turn on the
power.
2. FORWARD MOTION
To move forward, pull the right side of the throttle lever under the
control console toward you. The further you pull, the faster the scooter will
go. The maximum speed may be selected by the speed selection switch
located on the top of the control console.
3. REVERSE MOTION
To reverse, pull the left side of the throttle lever under the control
console toward you. Reverse speed is limited to 4.8 km/h.
4. STOP
To stop the scooter, just release the throttle lever. The RS1200 will
quietly come to a smooth stop and electromechanical brake will
automatically engage to hold the scooter in position on horizontal surface or
an incline of up to 15 degrees. Quick smooth stops are made possible by the
dynamic braking built in the controller.
Warning:
The brake may not be as effective when engaged on inclines greater
than 15 degrees or 21% if the occupant’s weight exceeds 400 pounds.
In case the brake fails to engage, the RS1200 may roll slowly on a
slope. Turn off the power immediately.
5. MOVE MANUALLY
When in operation, the clutch release lever is in its engaged position.
To move the scooter manually, release the clutch lever mounted on the
gearbox under the rear shroud. Should you wish to freewheel the RS1200
pull the lever to its release position? Or you can press the PUSH button
located on dashboard to release the brake. Take your finger off the PUSH
button, and the brake will re-engage.
Clutch Release
6