Orthofix Physio-Stim, Инструкция по эксплуатации

Страница: 8 / 36

Timing of Treatment Sessions
The Physio-Stim automatically times each treatment session. The timing begins
when the device is turned on. The LCD shows a countdown of the time
remaining in the treatment session. At the end of daily treatment, the device
will turn itself off. To stop treatment prior to the end of a treatment session,
simply press the On/Off button. To resume treatment, press the On/Off
button again. The LCD will display the remaining treatment time.
Note: For the countdown to function correctly, treatment sessions
should be greater than 60 minutes duration.
Charging/Recharging the Battery
The Physio-Stim is powered by a rechargeable lithium-ion battery pack.
A power supply is provided with the device. Use only the Orthofix charging
system to charge the battery. Note: The Physio-Stim battery will require
charging prior to the first use.
5
To charge/recharge the battery, simply plug the barrel connector end of the
power supply into the charger port located on the control unit. Plug the line
cord securely into the power supply. Plug the line cord into any standard AC
wall outlet. A fully discharged battery may require up to 4 hours to charge
completely.
The Physio-Stim battery can be recharged at any time the device is not in use.
It is strongly recommended that the device be recharged after
completing daily treatment.
Note: The Physio-Stim will not deliver treatment while charging.
When the device is on, the Physio-Stim LCD will show a battery capacity
symbol. A flashing battery outline, the symbol
and an audible beep
indicate a battery low condition and that the battery needs to be charged.
See “Visual and Audio Indicators” for more information.
LCD
On/Off Button
Control Unit
Power Supply
Line Cord
Charger Port
IR Port