INSTALLATION GUIDE
LED Wall Packs
MODEL
WP-100W
Instruction Manual
1-888-543-6473
1-888-541-6474
13376 Comber Way
Surrey BC V3W 5V9
[email protected]
www.ortechindustries.com
375 Admiral Blvd
Missis
s
auga
,
ON L5T 2N1
2. Pass the AC cables through the large centre hole on the mounting plate.
2.
Connect the holes on the mounting plate to the holes in the terminal block.
2.
Depending on the size of the holes in the junction box, use two #8 screws to
2.
attach the mounting plate to the junction box.
2.
Use the leveling bubbles in the mounting plate to adjust the horizontal
2.
mounting plate.
Scale 2:1
3. Hang the wire rope onto the mounting plate, then use the
3.
threaded terminal to connect L / N / GROUND wire, dim+ /
3.
dim - (if not, please ignore) separately, and then plug the
3.
threaded terminals into the embedded junction box as shown
3.
in the above diagram.
4. Hang the lamp on the mounting
4.
plate as shown by the red arrow
4.
in the above diagram.
5. Tighten the screws on the
5.
fixing device with a hexagon
5.
wrench, as shown in the
5.
diagram on the left.
6. Fill the top and sides of the
5.
lamp with waterproof
5.
silicone, as shown in the
5.
diagram on the left.
