Hardware Contents
INSTALLATION GUIDE
LED
Step Lights
MODEL
ST-PC1025
Instruction Manual
1-888-543-6473
1-888-541-6474
13376 Comber Way
Surrey BC V3W 5V9
[email protected]
www.ortechindustries.com
375 Admiral Blvd
Missis
s
auga
,
ON L5T 2N1
ORTECH reserves the right to modify at any time, without notice,
any or all of our product's features, designs, components and
specifications to meet market changes.
Outlet box
(not included)
Live wire
(Black)
Wire connector
(A)
Mounting plate
Hexagon socket screw
(C)
Grounding
Wire
Naught
Wire (White)
Mounting
Screw (B)
Face Plate
(Outdoor using) After installing the fixture,
caulk the connection between face plate and
wall by adhesive glue to prevent water
seeping into the outlet box.
1) Connect the wires of the fixture to wires on the outlet
box with wire connectors (A), WHITE to WHITE, BLACK
to BLACK. Loosen the GREEN screw in the mounting
plate and then twine the GREEN line of the fixture to
the GREEN screw, then secure it
2) When wires are connected, tuck them carefully inside
the outlet box and attach the mounting plate to the
outlet box by using mounting screws (B)
3) Make sure that the mounting plate is at the same
height as the wall. Assemble the face plate onto the
mounting plate and tighten the hexagon socket nut
with the Allen Key (D)
4) Restore power at fuse box / circuit breaker. Check the
operation of integrated LED fixture
5) Installation is complete
