Instruction Manual
1-888-543-6473
1-888-541-6474
13376 Comber Way
Surrey BC V3W 5V9
[email protected]
www.ortechindustries.com
375 Admiral Blvd
Missis
s
auga
,
ON L5T 2N1
Adjusting Your Light Heads
LED
Security Lights
MODEL
OL-
2
H
S
CAUTION
INSTALLATION GUIDE
Your light heads can be adjusted by turning the individual light head to desired position.
You can also adjust your light head up and down to your desired position.
WARNING
Risk of fire. DO NOT aim the bulbs at a combustible surface within 3 ft (1m).
Adjusting Your Motion Sensor
Your sensor head can be adjusted by turning the individual
light head to detection area.
You can also adjust your sensor head up and down to your detection distance.
Sensor head adjust
Pan:
left 170° / right 170°
Tilt:
up 0° / down 60°
REMINDER: If fixture is mounted higher
than
8
ft (2.4m),
aiming the sensor
down will reduce coverage distance.
The detector is less sensitive to motion
directly towards it.
Installation
For easy installation, select an existing light operated by a wall switch for replacement.
For better performance, mount the fixture about 8 ft (2.4m) above the ground.
If the fixture is mounted higher than 8 ft (2.4m), aiming the sensor down will reduce coverage distance.
Setting the Motion Sensor
Detection Range:
50'
Detection Angle:
180°
CAUTION
Keep the sensor at least
2" (51 mm) away from
the lamps.
Sensor Detection Range
Night Dusk Day
5s
1 5 12 min
