INSTALLATION GUIDE
Micro Compact Series
MODEL
OD
M-5004 | ODM-8010
Instruction Manual
1-888-543-6473
1-888-541-6474
13376 Comber Way
Surrey BC V3W 5V9
[email protected]
www.ortechindustries.com
375 Admiral Blvd
Missis
s
auga
,
ON L5T 2N1
P
lan the Installation
1. DO NOT use in a cooking area
2. Two ways to connect ductwork to a factory-shipped unit
Assembly Instructions
1.
Mount Housing to Joist or I-joist
a)
Hold the housing so that it is in contact with
the
bottom of the joist
b)
Attach the housing with four (4) screws to the joist
through
the holes in each mounting flange
2
.
Mount
with Hanger Bars
a)
Slide hanger bars have been provided, which allow the housing to
be positioned accurately anywhere between the framing.
The bars span up to 24" and can be used on all types of framing:
I-joist, standard joist, and truss construction. Slide hanger bars
onto housing and adjust as needed to fit between framing.
b)
Position the ventilator with the housing in contact with the bottom
of the joist, holding the ventilator in place. Secure hanger bars to
framing using one screw on each end of hanger bar
c)
Select a proper hole and secure the hanger bars together
using flange screws
