INSTALLATION GUIDE
LED
Patio String Lights
MODEL
PL50FT-3000K
Instruction Manual
1-888-543-6473
1-888-541-6474
13376 Comber Way
Surrey BC V3W 5V9
[email protected]
www.ortechindustries.com
375 Admiral Blvd
Missis
s
auga
,
ON L5T 2N1
1.
sda
2.
If attaching to guide wire, attach the ring at the back of
every bulb holder
to the guide wire using a S-hook or cable tie (sold separately)
3.
BEFORE EACH USE, inspect the general condition of the tool. Check for: loose hard wire, damaged cord/electrical wiring, cracked or broken
parts and any other condition that may affect its safe operation
* Replacement parts are not available for this item
Replace the Fuse
1. Grasp plug and remove from the receptacle or another outlet device. DO NOT unplug by pulling on the cord
2. To open the fuse cover, slide open fuse access cover on the top of the attachment plug towards the blades (see above diagram 2)
3. Remove the damaged fuse carefully. Use an electronic pen or small screw driver to lift up one end of the fuse from the fuse holder (see 3)
4. RISK OF FIRE — Replace fuse ONLY with 5A, 125V fuse (provided with product)
5. Close fuse cover. Slide closed the fuse access cover on top of attachment plug. RISK OF FIRE — DO NOT replace attachment plug since it
contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged (see above diagram 5)
2
3
5
Fuse
Access
Cover
Spare
Fuse
Connecting Cords
To reduce the risk of the cord plugs pulling apart, do
one of the following (see diagram on the right):
* Tightly female end, if not connecting multiple strip
*
lights, or laast set of connected string lights
Connector
Connect to
power outlet
Connect to string light (if connecting two or more)
OR
Installing / Replacing Light Bulbs
* DO NOT replace light bulbs during rain or when wet
. 2 years warranty for bulbs
1.
Unscrew existing bulbs carefully, they should be tight to keep moisture out
2.
Carefully consider the number of strings and the total wattage when selecting
bulb wattage. Refer to the table on the right — DO NOT exceed 960W, ALL
strings combined
3.
Replace with medium base light bulbs. Screw each bulb into socket clockwise
until top of socket forms a tight seal around the light bulb and bulb makes
solid contact with socket. Suitable for Incandescent, CFL, LED or CCL light
bulbs — Incorrectly installled bulbs will not seal correctly and can cause injury
or death from electric shock
ORTECH reserves the right to modify at any time, without notice,
any or all of our product's features, designs, components and
specifications to meet market changes.
