INSTALLATION GUIDE
Infrared Carbon Heaters
MODEL
HS-CH
1500W | HS-CH
2500W
Instruction Manual
1-888-543-6473
1-888-541-6474
13376 Comber Way
Surrey BC V3W 5V9
[email protected]
www.ortechindustries.com
375 Admiral Blvd
Missis
s
auga
,
ON L5T 2N1
Ceiling Installation
Products cannot be
tightly installed
The product requires an
L bracket to separate the
product from the
mounting plate
FUNCTION & OPERATION
OPERATING
Product Key Function:
1. Turn on the power, the
product standby mode
display (--);
2. Press key function:
press the button, then
press the heat levels
(L1-L2-L3-standby-off)
0º
The product power
cord cannot be
mounted horizontally
The product power
cord can be installed
downwards
Min 0.5m
(19-11/16")
Wall
Ceiling
2.4m
(94-1/2")
Wall
Ceiling
Min 0.5m
(19-11/16")
30º
45º
Remote Control Instructions
1.
Power Button: Turn the heater OFF
2.
Up Button: Increase timer and level
3.
Down Button: Decrease timer and level
4.
Level Button: Use to adjust the heat levels (L1-L3). Press the
level button then use the up and down buttons (buttons 2 and
3) to increase or decrease the heating level
5.
Timer Button: To set the timer from 0H-9H, which is the
number of hours it will run. 0H will display and then adjust to
the number of hours you would like to set, using the up and
down buttons (2 and 3)
Heaters and their remote controls have the same frequency, so it is possible to control several heaters with just one remote
Push Button: on the right of heater, it could be manual operated without remote control
5
º
