ORTEC radEAGLE, Руководство пользователя

Страница: 76 / 147

5.24 Factory Settings radEAGLE User Manual
5.24 Factory Settings
This command re-establishes the factory settings of your radEAGLE . You have to confirm
this command (Fig. 86 , p. 76 ).
Figure 86: Reset to factory settings
Reset
Discard all your changes to the settings of the radEAGLE and re-establish the factory
settings.
This includes the password for the protected settings (see 2.2.4 , p. 26 ).
Exit
Return to the superior screen.
5.25 Collect Reachback
This command initiates a collection of measurements for a reachback SOP. Initially, the col-
lection is empty.
Ü
To collect reachback data …
1. Press New to add a measurement.
2. Choose the type of measurement (background, known source, or unknown source,
Fig. 87 , p. 77 ).
3. Specify the duration of the measurement (To change default values see 5.6 , p. 51 ).
4. Start the measurement. The elapsed time is shown during the measurement (Fig. 88 ,
p. 77 ).
5. The name of the finished measurement file is appended to the collection.
6. Add more measurements ad libitum (Fig. 89 , p. 78 ).
7. Press Finish to close the collection.
76/147 Software 3.2.12 • Document 3.3.0o © innoRIID GmbH • 2019-04-11