ORTEC Detective X, Руководство пользователя

Страница: 84 / 131

ORTEC
®
Detective
®
X Handheld Radioisotope Identifier 1107231N / 082020
72
4.17.2 ID Mode Spectrum
To display or hide the ID Mode spectrum, tap the Allow display of spectrum checkbox to respectively mark
or unmark it (Figure 92).
Figure 92. Password Setup Screen
4.18 DEPLOYING MULTIPLE UNITS WITH IDENTICAL SETTINGS
As this manual makes evident, the Detective X gives the user a multitude of configuration options. Manually
configuring even two units identically would be an extremely challenging exercise. Setting up more than two
units identically would be far more cumbersome. To make this task easier, Detective X allows the creation of
a settings file that can be exported to multiple instruments. This will ensure all Detective X units operate
identically.
To export settings:

Select the Export Settings button from the Advanced Setup
screen.

This will write the current settings to an ASCII text file named
Settings.txt , which will be saved in C:\Hard Disk\
. Any
previous
Settings.txt
file will be overwritten (Figure 93).
Change the name or save the file if it is desired to save the
settings.

Figure 94 shows the partial contents of a
Settings.txt
file. The contents can be viewed by connecting
a PC to the micro USB connector on the rear panel (see Figure 5 or Figure 6). Simple changes can be
made with a text editor if necessary.

The user is now ready to temporarily move the first unit’s USB flash drive to a second Detective X,
then import the settings file by tapping the Import Settings button on the second unit’s Advanced
Setup screen. Settings will only be imported from a file named
Settings.txt
located in the root of
the USB flash drive. Before the second unit’s settings are overwritten, the user will be asked to
confirm the overwrite.
Figure 93. Confirmation of Saved
Settings