LINE IN
The input voltage should not exceed 2Vrms. This input can be used to integrate all the devices
having a analog output (such as phones, computers, mp3 players etc…)
This mode is selected when the Line In input LED is lighted in blue.
TOSLINK
It is an optical connection to the DAD. It is able to transmit a pair of audio data with a sampling
frequency up to 192KHz.
No drivers are required.
This mode is selected when the TOSLINK input LED is lighted in blue.
ADAT
It is also an optical connection to the DAD, but it can transmit four pairs of audio data at a sampling
frequency of 48KHz.
No drivers are required.
This mode is selected when the ADAT input LED is lighted in blue.
AES/EBU
No drivers are required.
This mode is selected when the AES/EBU input LED is lighted in blue.
S/PDIF
No drivers are required.
This mode is selected when the S/PDIF input LED is lighted in blue.
Factory Reset
To do a factory reset, turn off the device (not standby), press on the Previous buttons an turn on
the device again. You should see the red LED blinking very fast.
14/17
