FIGURE 05
FIGURE 06
FIGURE 07
You will need to program your entire light cycle from 00hr to 23hr. The default setting is 00%, and if you will not need to enter anything for
the hours that you want the light to be off. Once you have entered the % for each hour of the day,
Press
SET
and the unit will enter to the “blue wave” programming mode.
This is the
MOONLIGHT
mode, and it controls the 4 blue moonlights in the unit. If you only needed to make changes to your daylight
cycle you can hit set again and return the unit to service mode. If you need to adjust your moonlight cycle, continue in the “Blue Wave”
programming mode
Use the
(+) (–)
buttons to highlight “automatic”.
Press
OK
button.
This will bring you to the screen that you will use to enter the % that you want the lights at for each hour of the day.
The screen should display 00hr and 00%.
Attention: Please remember that the unit is using 24hr military time and 00hr is midnight.
Use the
(+) (–)
buttons to choose the percentage, and the
OK
button to advance to the next hour.
You will need to program your entire light cycle from 00hr to 23hr. The default setting is 00%, and if you will not need to enter anything for
the hours that you want the light to be off.
Once you have entered the % for each hour of the day.
Press
SET
button and the unit will enter back to the “service mode” and is ready for use.
Manual button is only used to set Daylight manually.
Press
Manual
button will bring you to the Daylight “Manual Mode”.
Manual Button
FIGURE 08
Use the
(+) (–)
buttons to choose the percentage. Press the
OK
button to save and the light will work instantly as settings. Or
press the
SET
to quit.
3
ORPHEK NILUS S CHANNEL
http://youtu.be/6DXBi0E_m7w
http://youtu.be/FcsckbvzwEc
http://youtu.be/EV3VUDMpdjE
’
1. Setting the time
2. Setting the daylight
3. Setting the moonlight
