Safety Instructions for Cleaning your Orphek Atlantik P300
Improper cleaning will damage temporarily or permanently your
Orphek Atlantik P300 unit(s) (Please check for our warranty
policies before cleaning your Orphek products)
1. Do not clean your unit(s) when turned on. 2. Do not apply
excessive wiping pressure or your body weight on the unit(s) to
clean it (them). 3. Do not use dirty, abrasive or linty cloths. 4. Do
not use any alcohol except isopropyl alcohol. 5. Do not use any
cleaners, such as acetone, which contain ketones, as they will
destroy the metal surfaces. 6. Do not use ammonia-cleaning
products. 7. Do not use metal or any kind polishing to clean your
unit. 8. Do not allow liquid to run into the air exits (fans) or inside
the metal grill. 9. Do not use hard sponges to clean your unit(s),
they will scratch the surfaces and damage it. 10. Do not you
sharp tools in attempt to clean your unit(s).
How to clean your Orphek Atlantik P300
1. Read the special considerations above. 2. Turn your unit(s) off
and allow it (them) to cool. 3. Make sure your cloth is dry, clean
and free of any grit before starting. 4. Using light pressure wipe
the surfaces to evenly remove any humidity or dust. 5. Be very
careful where the
LEDs are placed! Do not turn the unit(s) to
clean. 6. If possible uninstall each and every unit before cleaning.
7. Wipe gently and
do not overwork or apply excessive
pressure
to avoid damaging the LEDs. 8. Finally clean the
edges and corners by lifting any dust or debris onto the cloth or
use a clean soft brush. 9. Do not pull cords while cleaning your
unit(s).
Remember: Keeping your units clean is very important to keep
your Orphek Atlantik P300 running well, but over or unnecessary
cleaning may cause temporarily or permanently damage! So
don’t over do it!
