
– 43 –
Press the MEM button to adjust the Month then press the SET but-
ton to select the Day. Again, adjust the Day by using the MEM but-
ton. Once complete, press the SET button to adjust the Hour and
Minute by using the same way.
Once the time and date have been set, press the SET button. The unit
will switch off with the time and date stored correctly
Records delete:
With the unit off, press the MEM button to switch the unit on, then
press and hold the MEM button for a few seconds to delete the re-
cords.
The above procedure will delete the entire records, not just a single
measurement. Once delete, the records cannot be recovered.
Note:
The records will be stored even when the batteries have been remo-
ved to be changed. To re-adjust the setting (When the clocks change
for example), remove and re-install the batteries to re-start the set-
ting procedure. If however no changes is necessary after changing
the batteries, simply press the START/STOP button to start measu-
rement.
Cuff tube connection
Insert the cuff tube into the opening on the left side of the monitor
indicated by the drawing of a cuff.
Содержание ORO-N6 BASIC
Страница 64: ... 64 ...