Technical Note
•
May 4, 2021
Page
2
SecureSync 2400 Option Card Field Installation Guide
Outline of the Installation Procedure
The general steps necessary for installing SecureSync option cards are as follows:
1.
If adding or removing option cards that provide a reference, optionally backup your SecureSync con-
figuration (refer to
"[2]: Saving Refererence Priority Configuration" on the facing page
, if applicable to
your scenario or environment.)
2.
Safely
power down
the SecureSync unit and remove the top cover of the main chassis (housing).
3.
Select one of the unused Slots as installation location for the new card. The chosen Slot will
determine the
installation procedure
(see
"[3]: Determining the Installation Procedure" on page 5
).
4.
Prepare
slot (if required), and plug card into the slot.
5.
Connect
any required cables and secure option card into place.
6.
Replace chassis cover,
power on
unit.
7.
Log in to the SecureSync web interface;
verify
the installed card is identified.
8.
Restore
SecureSync configuration (if it had been backed up before, see above).
Safety
DANGER!
Electrical hazard. Unplug ALL power supplies before opening your SecureSync. Never
remove the cover or blank option plates with power applied to this unit.
DANGER!
This unit may contain more than one power source. Ensure all power sources are removed from
the unit prior to installing option cards by removing the power cords connected to the unit.
Caution:
The interior of this equipment does not have any user-serviceable parts. Contact Tech-
nical Support if this equipment needs to be serviced.
Caution:
Electric equipment is sensitive to Electrostatic Discharge (ESD). Observe all
ESD precautions and safeguards when handling the unit.
