1
OR-PRE-428, OR-PRE-428(GS)
schuko
(ENG) Operating and instalation instructions
ORNO-LOGISTIC Sp. z o.o.
ul. Katowicka 134
43-
190 Mikołów
tel. 32 43 43 110
(ENG) IMPORTANT!
Before using the device, read this Service Manual and keep it for future use. Any repair or modification carried out
by yourselves results in loss of guarantee. The manufacturer is not responsible for any damage that can result
from improper device installation or operation.
In view of the fact that the technical data are subject to continuous m odifications, the manufacturer reserves a
right to make changes to the product characteristics and to introduce different constructional solutions without
deterioration of the product parameters or functional quality.
The latest version of the Manual can be downloaded from www.orno.pl. Any translation/interpretation rights and
copyright are reserved in relation to this Manual.
1. Do not use the device against its intended use.
2. Disconnect the power supply before any activities on the product.
3. Do not dip the device in water or another fluids.
4. Do not operate the device when its housing is damaged.
5. Do not open the device and do not repair it by yourselves.
6. The device is designed to be operated inside buildings.
7. The device is fit to be operated only in a dry environment.
8. The device is designed to operate with its maximum load ranges.
Please read the following instructions carefully before connecting this timer to electrical appliances.
WARNING! DO NOT PLUG TWO OR MORE TIMERS TOGETHER!
Produced after 29th July 2005 Waste electrical products should not be disposed with household
waste. Please recycle where facilities exist.
Check with Your Local Authority or retailer for recycling advice.
IMPORTANT
Don't plug in an appliance where the load exceeds 8Amp. Always ensure the plug of any appliance is fully inserted into
the timer outlet. If cleaning of the timer is required, remove from mains power and wipe timer with a dry cloth.
DO NOT IMMERSE TIMER IN WATER OR ANY OTHER LIQUID.
Heaters and similar appliances should never be left unattended during operation. The manufacturer recommends such
appliances not to be connected with timers.
KEYB0ARD DEFINITION
1.
R(
RESET)
: Clear all data in memory including current time and all programs.
2.
UP
: Set current time combined with buttons
SET
,
DOWN
; Set programs combined with buttons
SET
,
DOWN
; Set
CD
combined with buttons
SET
,
DOWN
; Press
UP
and
DOWN
buttons simultaneously to enter
CLOCK
mode under
PROGRAM
setting mode or
CD
setting mode.
3.
SET
: Set current time combined with buttons
UP
,
DOWN
; Set programs combined with buttons
UP
,
DOWN
; Set
CD
combined with buttons
UP
,
DOWN
;
4.
DOWN
: Set current time combined with buttons
SET
,
UP
; Set programs combined with buttons
SET
,
UP
; Set
CD
combined with buttons
SET
,
UP
;
5.
RND(RANDOM)
: Set or cancel
RND
function.
6.
CD(COUNT DOWN)
: Set or cancel
CD
function.
7.
MANUAL
: Select operating modes (
ON,AUTO,OFF)
of timer;
Override programs or recall the overridden programs in
setting programs.
GENERAL FEATURES
1. 10 ON/OFF programs with 1 minute step.
2. MANUAL ON/AUTO/MANUAL OFF selectable.
3. 12/24 hour mode selectable.
4. LCD display with second.
5. Summer time function available.
6. Random function with a randomly on 10-31minutes between 6:00 PM and 6:00 AM.
7. 16 combinations of day or blocks of days available as follows:
MO
TU
