6.1 Camera Pairing
Power on the receiver and camera by connecting it to power outlet with supplied
power adaptor respectively.
The pairing function assigns each camera to a different channel on the wireless
receiver(up to 4 cameras),and is necesssary for configuring additional cameras.
NOTE:It is highly recommended to pair the cameras to the receiver before
Permanently mounting the cameras.
1. Power on the Monitor/DVR and camera by connecting it to power outlet with supplied
power adaptor.
Setting/Pairing
2.Press the Menu button on Monitor/DVR or remote controller to select
Camera
“
”.
f
4. A message will be dispalyed on the receiver screen. The receiver will count down
rom 30 to 0 you must press the
pair
button on the camera during this time
to successfully pair the camera.
“
”
USER S MANUAL
'
6. SYSTEM OPERATION
3.select a channel by pressing the
buttons on the remote controller or pushing
the joystick on the monitor.
“ ”
▲
▲
Paring button
Microphone
Pickup hole
no pairing will take place.
If the button on the camera is not pressed, the receiver will display
Pair Fail
and
“
”
- 9 -