Ormesa DONDOLINO, Руководство по эксплуатации и обслуживанию

Страница: 10 / 17

Pag. 10 di 17
HOW TO ADJUST DONDOLINO
WHILE ADJUSTING THE STANDING FRAME IT IS IMPORTANT TO FOLLOW THREE PHASES
AND IT MUST BE ADJUSTED UNDER THE DIRECT CONTROL OF THE DOCTOR WHO
PRESCRIBES IT
1ST. PHASE: YOU HAVE TO CONSIDER:
1. the height of the child from under his chest to the ground is needed to fix the chest
support;
2. the height from the knee-cap to the ground is needed to fix the knee-pads of the stand-
ing frame;
You can measure while the child is standing or while he is laying.
2ND. PHASE: INITIAL ADJUSTMENT WITHOUT THE CHILD AND CONSIDERING THE MEAS-
URES THAT YOU MUST MEASURE BEFORE
3RD. PHASE: SUBSEQUENT ADJUSTMENT WITH THE CHILD
Check:
1. that the back strap, once it is closed, is in the middle of the bottom. The height of the
arm supports depends on the position of the back support of the pelvis;
2. the position of the knee-pads;
3. the position of the heel rests in width and depth;
4. the position of the table. It must be fixed controlling the height of the User from under
his elbow to the ground (minimum height). Shouldn’t it be possible to make this control,
you can measure the distance from the bended elbow to his feet while the User is laying.
5. the vertical alignment of the chest and pelvis
6. the flexion of the limbs: the vertical position is determined by the front and back
adjustment of the pelvis support, of the knee-pads and of the heel rests.
WARNINGS : ALL THE ADJUSTABLE PARTS MUST HAVE BEEN WELL LOCKED!!!
Always check that all the adjustments have been correctly fixed in order to avoid any possible
danger to the User.
WARNINGS:
THE ADJUSTMENTS MUST BE ALWAYS CONTROLLED BY THE DOCTOR WHO PRESCRIBES
THE AID AND BY THE THERAPIST WHENEVER THEY THINK IT IS NEEDED. THIS IS IMPOR-
TANT TO OPTIMIZE THE VERTICAL POSITION BECAUSE THE RIGHT USE OF THE STANDING
FRAME CONDITIONS THE FLEXION OF THE USER AND IT REDUCES HIS RIGIDITY